Advanced Category Search:
 

Engine Case Tools



Product Image Item Name- Model Price
Jims Interconnect Seal Testing Tool for 2000-UP Softails

Jims Interconnect Seal Testing Tool for 2000-UP Softails

Part Number: 16-1859 Application: FXST 2000-UP with balancer assembly FLST 2000-UP with balancer assembly Details: Used to check the sealing of interconnect seal. For use on OEM 45359-00 interconnect seal. This seal is required to seal the oil passageway from the right case to the balancer...
16-1859 $54.88
Sale: $49.39


... more info
Sold Out
To be notified when this product is back in stock please click here.

Jims Needle Bearing Rod Tool for XL 1960-UP Sportsters

Jims Needle Bearing Rod Tool for XL 1960-UP Sportsters

Part Number: 16-1857 HD-OEM: 97273-60 Application: XL 1960-UP Details: This rod installs needle bearings without damage. UOM: 1 - EA Country of Origin: USA
16-1857 $81.43
Sale: $74.10


Buy Now

Jims Rod Race Press Tool for Big Twins & Sportsters

Jims Rod Race Press Tool for Big Twins & Sportsters

Part Number: 16-1838 Application: EL 1936-1940 FL 1941-1984 FX 1971-1984 FXST 1984-1998 FLST 1986-1998 FXD 1991-1998 FXR 1982-1994 FLT 1979-1998 XL 1957-UP Details: The Jims rod race press tool makes for easy installation or extraction of rod races and making it easy to support without bending...
16-1838 $213.71
Sale: $203.02


Buy Now

Jims Rolling Buddy Engine Dummy Plate for 1984-98 Big Twins

Jims Rolling Buddy Engine Dummy Plate for 1984-98 Big Twins

Part Number: 16-1134 Application: FLT 1984-1998 FXD 1991-1998 FXR 1984-1994 Details: Jims rolling buddy engine dummy plate is to be used on all rubber mount Big Twins. This tool will allow chassis to be moved once the engine has been removed from the frame. UOM: 1 - EA Country of Origin: USA
16-1134 $82.97
Sale: $75.50


Buy Now

Jims Sportster Crankshaft Locking Tool for XL 2000-UP Sportsters

Jims Sportster Crankshaft Locking Tool for XL 2000-UP Sportsters

Part Number: 16-1665 Application: XL 2000-UP Details: This locking tool is used on pinion side to keep crankshaft assembly from rotating during assembly on valve train repair . UOM: 1 - EA Country of Origin: USA
16-1665 $59.88
Sale: $53.89


Buy Now

Jims Sprocket Shaft Holder Tool for 1955-UP Big Twins

Jims Sprocket Shaft Holder Tool for 1955-UP Big Twins

Part Number: 16-0683 Application: FL 1955-1984 FX 1971-1984 FXST 1984-UP FLT 1979-UP FLST 1986-UP FXD 1991-UP FXR 1982-1994 Details: Jims sprocket shaft holder tool holds the flywheel assembly in a vise with or without the left case attached. UOM: 1 - EA Country of Origin: USA
16-0683 $123.43
Sale: $114.79


... more info
Sold Out
To be notified when this product is back in stock please click here.

Jims Sprocket Shaft Seal Installer Tool for XL 1995-UP

Jims Sprocket Shaft Seal Installer Tool for XL 1995-UP

Part Number: 16-0661 Application: XL 1995-UP Details: Jims sprocket shaft seal installer tool is designed to install sprocket shaft seal to proper depth and for holding the seal perfectly square for a no leak fit. UOM: 1 - EA Tech. Notes: Suggested to use with #16-0664 main driver tool set Country...
16-0661 $114.56
Sale: $106.54


Buy Now

Jims TC-88 Crankshaft Rear Bearing Tool for 1999-UP Big Twins

Jims TC-88 Crankshaft Rear Bearing Tool for 1999-UP Big Twins

Part Number: 16-1275 Application: FXST 1999-UP FLST 1999-UP FXD 1999-UP FLT 1999-UP Details: This crankshaft bearing tool is designed to remove and repla ce the right crankcase bearing in and out with no damage to crankcase. UOM: 1 - EA Country of Origin: USA
16-1275 $194.19
Sale: $184.48


Buy Now

Jims Timken Bearing Puller Tool for XL 1957-1976 Sportsters

Jims Timken Bearing Puller Tool for XL 1957-1976 Sportsters

Part Number: 16-0667 Application: XL 1957-1976 Details: Jims Timken bearing puller tool removes the inner Timken bearing from the sprocket shaft, without removing the shaft from the flywheels. UOM: 1 - EA Country of Origin: USA
16-0667 $286.39
Sale: $272.07


Buy Now

Jims Timken Bearing Race Installer Tool for 1969-98 Big Twins & XL

Jims Timken Bearing Race Installer Tool for 1969-98 Big Twins & XL

Part Number: 16-0668 HD-OEM: 94547-80A Application: XL 1977-2003 FL 1969-1984 FX 1971-1984 FXST 1984-1998 FLST 1986-1998 FLT 1979-1998 FXR 1982-1994 FXD 1991-1998 Details: Jims Timken bearing race installer tool is used when installing bearing races in the left crankcase. Use this tool to press in...
16-0668 $259.29
Sale: $246.33


Buy Now

Jims Timken Bearing Remover Tool for 1986-98 Big Twins

Jims Timken Bearing Remover Tool for 1986-98 Big Twins

Part Number: 16-0704 HD-OEM: 1709 Application: FXST 1986-1998 FLST 1986-1998 FLT 1986-1998 FXR 1986-1994 FXD 1991-1998 Details: Jims Timken bearing remover tool will remove the sprocket shaft Timken bearing. This is a specialized tool to do the job better than anything else. UOM: 1 - EA Country of...
16-0704 $241.33
Sale: $229.26


... more info
Sold Out
To be notified when this product is back in stock please click here.

Jims VO Scope Tool

Jims VO Scope Tool

Part Number: 16-0385 Application: All models Details: Allows the technician the ability to look inside most any hole that is larger than 1/4" . This is a live remote video and features high resolution focus, color camera, and a 2-1/2" full color viewing monitor. Equipped with a sealed fluid proof,...
16-0385 $337.74
Sale: $320.85


Buy Now

Jims XL 1981-UP Crank Flywheel Nut Socket Tool

Jims XL 1981-UP Crank Flywheel Nut Socket Tool

Part Number: 16-0887 HD-OEM: 23901-81 Application: XL 1981-UP Details: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 3/4" drive. UOM: 1 - EA Tech. Notes: This Item is not available....
16-0887 $49.88
Sale: $44.39


... more info
Sold Out
To be notified when this product is back in stock please click here.

Pin Flywheel Nut Socket Tool for 1981-1989 Big Twins

Pin Flywheel Nut Socket Tool for 1981-1989 Big Twins

Part Number: 16-1811 HD-OEM: 24017-80 Application: FL 1981-1984 FX 1981-1984 FLT 1981-1989 FXR 1982-1989 FXST 1984-1989 FLST 1986-1989 Details: Jims pin flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut....
16-1811 $86.05
Sale: $78.31


... more info
Sold Out
To be notified when this product is back in stock please click here.

Shaft Turning Tool Jims for 2006-UP Big Twins

Shaft Turning Tool Jims for 2006-UP Big Twins

Part Number: 16-1378 Application: FXD 2006-UP FLST 2007-UP FXST 2007-UP FLT 2007-UP Details: This Jims shaft turning tool fits spline or taper on assembled motor and allows engine to be turned over by 1/2" ratchet or impact driver. UOM: 1 - EA Country of Origin: USA
16-1378 $132.57
Sale: $123.29


Buy Now

Snap Ring Remover Tool for 1990-1998 Big Twins

Snap Ring Remover Tool for 1990-1998 Big Twins

Part Number: 16-0705 Application: FXST 1990-1998 FLST 1990-1998 FLT 1990-1998 FXD 1991-1998 FXR 1990-1994 Details: Snap ring remover tool will remove the Timken bearing outer race snap ring without damage to the case. You can replace the snap ring in Big Twin cases without the fear of gouging the...
16-0705 $113.69
Sale: $105.73


Buy Now

Sprocket Flywheel Nut Socket Tool Jims for 1972-1986 Big Twins

Sprocket Flywheel Nut Socket Tool Jims for 1972-1986 Big Twins

Part Number: 16-1812 Application: FL 1972-1984 FX 1972-1984 FXST 1984-1986 FLST 1986 FLT 1979-1986 FXR 1982-1986 Details: Jims sprocket flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 3/4" Drive....
16-1812 $99.85
Sale: $90.86


Buy Now

Sprocket Shaft Bearing Installer Tool for XL 1979-2003

Sprocket Shaft Bearing Installer Tool for XL 1979-2003

Part Number: 16-1761 HD-OEM: 37047-91 Application: XL 1979-2003 Details: Sprocket shaft Timken bearing installer tool is used to inst all crank shaft assemblies into crankcase. This tool also can be used to install the bearing until tool runs out of threads. Tool is 2.060" long. UOM: 1 - EA Tech....
16-1761 $44.75
Sale: $39.83


Buy Now

Sprocket Shaft Bearing Installer Tool Jims for XL 1977-2003

Sprocket Shaft Bearing Installer Tool Jims for XL 1977-2003

Part Number: 16-1760 Application: XL 1977-2003 Details: Sprocket shaft Timken bearing installer tool is used to install crank shaft assemblies into crankcase. Tool is 2.500" long. UOM: 1 - EA Tech. Notes: Required to use with #16-1761 Sprocket shaft bearing installation tool Country of Origin: USA
16-1760 $45.33
Sale: $40.34


Buy Now

Sprocket Shaft Bearing Tool for 1954-1976 K & XL

Sprocket Shaft Bearing Tool for 1954-1976 K & XL

Part Number: 16-1837 HD-OEM: 97081-54 Application: XL 1957-1976 K 1954-1956 Details: Jims sprocket shaft bearing installer tool is used to instal l flywheel assembly into left crankcase Timken bearing. If using this tool on a 1977-up XL we require using the 2.500" and 2060" sprocket shaft bearing...
16-1837 $191.21
Sale: $181.65


Buy Now

Sprocket Shaft Bearing Tool for 1955-1998 Big Twins

Sprocket Shaft Bearing Tool for 1955-1998 Big Twins

Part Number: 16-1836 HD-OEM: 97225-55 Application: FL 1955-1984 FX 1971-1984 FXST 1998-1998 FLT 1979-1998 FXD 1991-1998 FLST 1986-1998 FXR 1982-1994 Details: Jim sprocket shaft bearing installer tool UOM: 1 - EA Country of Origin: USA
16-1836 $199.29
Sale: $189.33


Buy Now

Sprocket Shaft Bearing Tool for 1955-2003 Big Twins & Sportsters

Sprocket Shaft Bearing Tool for 1955-2003 Big Twins & Sportsters

Part Number: 16-0058 HD-OEM: 94547-80A Application: FL 1955-1984 FX 1971-1984 FXST 1984-1998 FLT 1979-1998 FXD 1991-1998 FLST 1986-1998 FXR 1982-1994 XL 1957-2003 Details: Sprocket shaft bearing tool removes and installs engine sprocket shaft bearings from crankcase. Tool is a 2 part set. Sold as a...
16-0058 $150.86
Sale: $143.32


Buy Now

Sprocket Shaft Seal and Lock Installer for FL 1955-1969

Sprocket Shaft Seal and Lock Installer for FL 1955-1969

Part Number: 16-0888 HD-OEM: 97235-55B Application: FL 1955-1969 Details: Sprocket shaft seal wrench tool installs and removes bearing nut on Big Twin models. UOM: 1 - EA Country of Origin: USA
16-0888 $142.06
Sale: $132.12


Buy Now

Sprocket Shaft Seal Install Tool for 1970-1998 Big Twins

Sprocket Shaft Seal Install Tool for 1970-1998 Big Twins

Part Number: 16-1754 Application: FL 1970-1984 FX 1971-1984 FXST 1984-1998 FXR 1982-1994 FXD 1991-1998 FLST 1986-1998 FLT 1979-1998 Details: Sprocket shaft seal and lock installers for Big Twins. Use with a bearing tool to help install seal. UOM: 1 - EA Tech. Notes: Order #16-0140 or #16-1836...
16-1754 $114.19
Sale: $106.20


Buy Now


Copyright © 2018 Biker Direct Motorcycle Parts
Site content and prices are subject to change without notice. Be advised that all orders placed on BikerDirect.com are processed and charged in U.S. Dollars (USD) only, regardless of the currency selected at or prior to checkout. Prices quoted in non-USD currencies are provided for information purposes only and may not accurately reflect actual foreign currency exchange rates at the time of purchase (see theTerms of Usepage for more information). All trademarks and trade names referred to on the BikerDirect.com website are the property of their respective trademark holders. Use of the word Harley-Davidson®, various model names and designations, and OEM part numbers are provided solely for reference and application information and there is no affiliation between Harley-Davidson®, Inc. and Biker Direct. See thedisclaimerspage for further clarification.