Advanced Category Search:
 

Engine Case Tools



Product Image Item Name- Model Price
Balancer Bearing Remover and Installer Tool for 1999-UP Big Twins

Balancer Bearing Remover and Installer Tool for 1999-UP Big Twins

Part Number: 16-0540 HD-OEM: 44066 Application: FXST 1999-UP FLST 1999-UP FXD 1999-UP FLT 1999-UP Details: Jims balancer bearing remover and installer tool pulls the bearings from the B model Softail motor case in one easy smooth motion preventing any damage to the bearing bores. The installing...
16-0540 $138.13
Sale: $128.46


... more info
Sold Out
To be notified when this product is back in stock please click here.

Balancer Shaft Alignment Tool for 1999-UP Big Twins

Balancer Shaft Alignment Tool for 1999-UP Big Twins

Part Number: 16-1166 Application: FXST 1999-UP FXD 1999-UP FLST 1999-UP FLT 1999-UP Details: Use the Jim's balancer shaft alignment for correct balancer drive assembly. Tool will maintain a long life of your balan cers drive chains and bearings. Tool will work out the setting up of your sprocket...
16-1166 $255.61
Sale: $242.83


... more info
Sold Out
To be notified when this product is back in stock please click here.

Case Cylinder Spigot Bore Tool up to 3.8125" Jims

Case Cylinder Spigot Bore Tool up to 3.8125" Jims

Part Number: 16-1409 Application: FXST 1984-1998 FLST 1986-1998 FXD 1991-1998 FLT 1984-1998 FXR 1984-1994 Details: This Jims spigot bore tool allows the boring of cylinder spigot hole up to 3.8125" by using the stock cylinder base holes. UOM: 1 - EA Country of Origin: USA
16-1409 $1,138.01
Sale: $1,103.87


Buy Now

Crank Flywheel Nut Socket Tool for 1954-1981 FL & FX

Crank Flywheel Nut Socket Tool for 1954-1981 FL & FX

Part Number: 16-1809 HD-OEM: 23966-54A Application: FL 1954-1981 FX 1971-1981 Details: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 1/2" Drive. UOM: 1 - EA Country of Origin: USA
16-1809 $92.23
Sale: $83.93


Buy Now

Crank Flywheel Nut Socket Tool for 1983-1986 Big Twins

Crank Flywheel Nut Socket Tool for 1983-1986 Big Twins

Part Number: 16-1810 HD-OEM: 23969-83 Application: FL 1983-1984 FX 1983-1984 FXST 1984-1986 FXR 1983-1986 FLT 1983-1986 FLST 1986 Details: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits...
16-1810 $91.85
Sale: $83.58


Buy Now

Crank Flywheel Nut Socket Tool for XL 1981-UP Sportsters

Crank Flywheel Nut Socket Tool for XL 1981-UP Sportsters

Part Number: 16-1813 HD-OEM: 23901-81 Application: XL 1981-UP Details: The Jims flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 1/2" Drive. UOM: 1 - EA Country of Origin: USA
16-1813 $92.20
Sale: $83.90


Buy Now

Jim Case Splitter Tool for 2006-UP Big Twins

Jim Case Splitter Tool for 2006-UP Big Twins

Part Number: 16-1354 Application: FXD 2006-UP FXST 2007-UP FLT 2007-UP FLST 2006-UP Details: Use this tool to expertly and safely break the case sealant by pushing apart both halves. This tool bolts to the primary mounting holes with supplied hardware. Hand thread in pushing screw. The flywheels...
16-1354 $302.97
Sale: $287.82


... more info
Sold Out
To be notified when this product is back in stock please click here.

Jim Timken Bearing Simulator Tool for 1970-98 Big Twins

Jim Timken Bearing Simulator Tool for 1970-98 Big Twins

Part Number: 16-0706 HD-OEM: 1745 Application: FL 1970-1984 FX 1971-1984 FXST 1984-1998 FXR 1982-1994 FXD 1991-1998 FLST 1986-1998 FLT 1979-1998 Details: Jim Timken bearing simulator tool is designed to allow quick and easy removal and replacement of flywheel assembly in the left side crankcase...
16-0706 $81.55
Sale: $74.21


... more info
Sold Out
To be notified when this product is back in stock please click here.

Jims 1981-1989 Big Twins Pin Flywheel Nut Socket Tool

Jims 1981-1989 Big Twins Pin Flywheel Nut Socket Tool

Part Number: 16-0886 Application: FL 1981-1984 FX 1981-1984 FLT 1981-1989 FXR 1982-1989 FXST 1989-1998 FLST 1986-1989 Details: Jims pin flywheel nut socket features a low profile to give 100 percent nut contact, machined flat at nut receiving end to eliminate rounding off the nut. Fits 3/4" drive....
16-0886 $45.33
Sale: $40.34


... more info
Sold Out
To be notified when this product is back in stock please click here.

Jims 1999-UP Big Twins Crankshaft Bearing Tool

Jims 1999-UP Big Twins Crankshaft Bearing Tool

Part Number: 16-1672 Application: FXST 2003-UP FLST 2003-UP FXD 2003-UP FLT 2003-UP Details: This crankshaft locking tool locks all crankshafts by engaging the pinion shaft splines. This allows removal and torquing of the pinion nut during installation. UOM: 1 - EA Country of Origin: USA
16-1672 $191.33
Sale: $181.76


... more info
Sold Out
To be notified when this product is back in stock please click here.

Jims 1999-UP Big Twins Flywheel Locking Tool

Jims 1999-UP Big Twins Flywheel Locking Tool

Part Number: 16-2753 Application: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP Details: Jims Twin Cam flyhweel locking and decommissioned tool locks the flywheel in place making service procedures easier. This tool is very visable and useful to designate a bike as decommissioned. The bike will...
16-2753 $42.00
Sale: $37.38


Buy Now

Jims Balancer Retainer Tool for 2000-UP Softails

Jims Balancer Retainer Tool for 2000-UP Softails

Part Number: 16-1858 Application: FXST 2000-UP with balancer assembly FLST 2000-UP with balancer assembly Details: Used to hold the hydraulic tensioners in place when repairing Beta engines. Hydraulic tensioners are used to keep constant chain tension on the counter balancer system. Without the use...
16-1858 $42.91
Sale: $38.19


Buy Now

Jims Balancer Shaft Inner Bearing Service Tool for 1999-UP Big Twins

Jims Balancer Shaft Inner Bearing Service Tool for 1999-UP Big Twins

Part Number: 16-1915 Application: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP Details: Jims balancer shaft inner bearing service tool is used to remove and install bearing on all 2000-up Twin Cams. This tool will accurately remove and install the inner balancer bearing mounted in the left...
16-1915 $228.47
Sale: $217.05


Buy Now

Jims Case Bolt Spot Face Tool for 1999-UP Big Twins

Jims Case Bolt Spot Face Tool for 1999-UP Big Twins

Part Number: 16-0381 Application: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP Details: Tool is needed to spot face the right case so that the bolt head will seat flat on the case surface. This tool is required when any Twin Cam case spigot hole is enlarged for Big Bore Cylinders Tool is...
16-0381 $120.49
Sale: $112.06


Buy Now

Jims Case Lap Tool for 1958-1998 Big Twins

Jims Case Lap Tool for 1958-1998 Big Twins

Part Number: 16-1835 Application: FL 1958-1984 FX 1971-1984 FXD 1991-1998 FXR 1982-1994 FXST 1984-1998 FLT 1979-1998 Details: Jims case lap tool features a lap which is supported on both sides by a pilot on the bushing side and plate which locates on the case pins of the cam cover. UOM: 1 - EA...
16-1835 $1,169.17
Sale: $1,134.09


Buy Now

Jims Case Support Block Tool for 1999-UP Big Twins

Jims Case Support Block Tool for 1999-UP Big Twins

Part Number: 16-1916 Application: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP Details: Jims case sport block tool attach to the outer side of the engine case under the balancer bearing pads surface. This is to protect the left engine case while servicing the inner balancer bearings. UOM: 1 -...
16-1916 $98.35
Sale: $89.50


Buy Now

Jims Center Case Bolt Oversize for 1999-UP Big Twins

Jims Center Case Bolt Oversize for 1999-UP Big Twins

Part Number: 16-0380 Application: FXST 1999-UP FLST 1999-UP FLT 1999-UP FXD 1999-UP Details: Required when any Twin Cam case cylinder spigot hole is enlarged for Big Bore cylinders. UOM: 1 - EA Tech. Notes: Suggested to use with #16-0381 case bolt tool. Country of Origin: USA
16-0380 $25.33
Sale: $22.04


Buy Now

Jims Crank Assembly Removal Tool

Jims Crank Assembly Removal Tool

Part Number: 16-1839 Application: All models Details: This removal tool is used to press flywheels from cases, press cases apart and break the sealant bond easily and safely. UOM: 1 - EA Country of Origin: USA
16-1839 $244.64
Sale: $232.41


Buy Now

Jims Crank Shaft Guide White for 1999-UP Big Twins

Jims Crank Shaft Guide White for 1999-UP Big Twins

Part Number: 16-1281 Application: FXST 1999-UP FLST 1999-UP FXD 1999-UP FLT 1999-UP Details: Use this crank shaft guide to spread pinion bearing rollers while reassembling right side engine case on to flywheel assembly. UOM: 1 - EA Country of Origin: USA
16-1281 $43.00
Sale: $38.27


Buy Now

Jims Crankshaft Gear Locking Tool for XL 1991-1999

Jims Crankshaft Gear Locking Tool for XL 1991-1999

Part Number: 16-1666 Application: XL 1991-1999 Details: This locking tool is used on pinion side to keep crankshaft assembly from rotating during assembly on valve train repair . UOM: 1 - EA Country of Origin: USA
16-1666 $59.88
Sale: $53.89


Buy Now

Jims Flywheel Holding Tool for 2006-UP Big Twins

Jims Flywheel Holding Tool for 2006-UP Big Twins

Part Number: 16-0326 Application: FXD 2006-UP FXST 2007-UP FLST 2007-UP FLT 2007-UP Details: Jims flywheel holding tool is used to hold flywheel assembly in vise with or without left case attached. Can also be used to check case clearance on stroker flywheels. UOM: 1 - EA Country of Origin: USA
16-0326 $102.97
Sale: $95.76


Buy Now

Jims Flywheel Runout Gauge Tool for 1970-UP Big Twins

Jims Flywheel Runout Gauge Tool for 1970-UP Big Twins

Part Number: 16-0383 Application: FL 1970-1984 FX 1971-1984 FLT 1979-UP FXR 1982-1994 FXST 1984-UP FLST 1986-UP FXD 1991-UP Details: Allows the engine builder to check flywheel run out of the pinion shaft while assembled in the engine case. Also allows the checking of gear lash on gear driver cams...
16-0383 $128.46
Sale: $119.47


Buy Now

Jims Flywheel Truing Tool

Jims Flywheel Truing Tool

Part Number: 16-0325 Application: All models Details: Jims flywheel truing tool is to tune flywheel assemblies when truing. This tool features both a flywheel expander and contractor in one easy to use package. Use on all tapered shaft flywheel assemblies. UOM: 1 - EA Country of Origin: USA
16-0325 $467.70
Sale: $444.32


Buy Now

Jims Hard Cap Tool for 1955-UP Big Twins

Jims Hard Cap Tool for 1955-UP Big Twins

Part Number: 16-0666 Application: FL 1955-1984 FX 1971-1984 FXST 1984-UP FLT 1979-UP FLST 1986-UP FXD 1991-UP Details: Jims hard cap tool protects shaft when using press. UOM: 1 - EA Country of Origin: USA
16-0666 $56.55
Sale: $50.90


Buy Now


Copyright © 2018 Biker Direct Motorcycle Parts
Site content and prices are subject to change without notice. Be advised that all orders placed on BikerDirect.com are processed and charged in U.S. Dollars (USD) only, regardless of the currency selected at or prior to checkout. Prices quoted in non-USD currencies are provided for information purposes only and may not accurately reflect actual foreign currency exchange rates at the time of purchase (see theTerms of Usepage for more information). All trademarks and trade names referred to on the BikerDirect.com website are the property of their respective trademark holders. Use of the word Harley-Davidson®, various model names and designations, and OEM part numbers are provided solely for reference and application information and there is no affiliation between Harley-Davidson®, Inc. and Biker Direct. See thedisclaimerspage for further clarification.